Velleman projects K8049 Assembly instructions - Manual (Page 10)

10
At first power up, mode 1 is automatically selected.
Press and hold SHIFT to change mode. Led starts flashing.
Press button 1..8 to select desired mode as shown below.
Hint : When the batteries are inserted, the led flashes 1..4 times indicating the selected mode.
Key Description
1 'K6710 emulation with D4 mounted'- mode. Allows control of MK161/K8050/K6711/12/13.
15 channels available ('shift' & '8' = all clear). Shift is cleared after each key press.
2 'K6710 emulation with D6 mounted'-mode. Allows control of MK161/K8050/K6712/13. 15
channels available ('shift' & '8' = all clear). Shift is cleared after each key press.
3 'K6710 emulation with D5 mounted'-mode. Allows control of MK161/K8050/K6712/13. 15
channels available ('shift' & '8' = all clear). Shift is cleared after each key press.
4 Allows simultaneous control of K4100/K4500, MK163/MK164, MK161 and
K8050/K6711/12/13
5 Identical to 1 but ‘shift’ is not cleared after each key press.
6 Identical to 2 but ‘shift’ is not cleared after each key press.
7 Identical to 3 but ‘shift’ is not cleared after each key press.
8 Identical to 4 but ‘shift’ is not cleared after each key press.
12. Mode selection
To access channel 1..8 :
Press button for channel 1..8.
Holding the button will result in continuous transmission, led will flash indicating transmission.
To access channel 9..16 :
Briefly press 'shift'. Led will light indicating that 'shift' has been pressed.
Press button 1..8 to access channel 9..16
Holding the button will result in continuous transmission.
If no button is pressed after 'shift' has been pressed, the 'shift'-led will turn off in about 10s, hereby
cancelling the 'shift'-selection.
Pressing 'shift' repeatedly toggles between shift-on and shift-off.
13. Use
Mode selection & Use