Velleman VMB1TCW - Manual (Page 28)

9. Confirm with the
→ button to start the clock from the
set time.
10. Exit the menu with the
 button.
Setting the alarm clock
The module contains an alarm clock that can be enabled or disabled. The alarm times can be used in a thermostat
program but also to control an output module (e.g. a relay module).
E.g. the wake-up time can be used to switch on the heating while the go-to-bed time can be used to switch the heating
off.
1. Open the menu by pressing the ‘Menu’ button.
2. Scroll through the menu using the ↑ button until the
‘Alarm set’ item appears.
3. Select the alarm set menu with the → button.
The alarm-indication flashes.
4. Set the alarm clock function with the ↑ or ↓ button.
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Clock set
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Mo 14:24 20
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Temp. settings
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Alarm clock set
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Alarm clock: ___
Location

↑
↓ Menu
→
Mode
←
Temp sensor 01
Alarm clock: On