Velleman projects K8090 Assembly instructions - Manual (Page 5)

5
* Typographical inaccuracies excluded. Always look for possible last minute man-
ual updates, indicated as ‘NOTE’ on a separate leaflet.
1.3 Soldering Hints :
1- Mount the component against the PCB
surface and carefully solder the leads
2- Make sure the solder joints are cone-shaped
and shiny
3- Trim excess leads as close as possible to the
solder joint
REMOVE THEM FROM THE TAPE ONE AT A TIME !
Assembly hints
DO NOT BLINDLY FOLLOW THE ORDER OF
THE COMPONENTS ONTO THE TAPE.
ALWAYS CHECK THEIR VALUE ON THE
PARTS LIST!