Velleman projects K8047 Assembly instructions - Manual (Page 9)

9
B. Test :
•
Hook-up a USB cable between a free port of your computer
and the K8047 (see page 8.)
•
Connect a 9V battery to one of the signal inputs (CH1, CH2,
CH3 or CH4), respect the polarity (+ and -)!
•
Start the PC-Lab2000 software and select the appropriate
device (K8047).
•
Select 15 or 30V range.
•
Press the run button.
The unit is ready for use when a signal appears on the
screen.
G
Other information concerning this unit
can be found on the CD.
Software installation & test
Fig 2.0