Velleman projects K8090 Infosheet - Manual

New P
roduc
t info
Eight relay channels controlled
by your computer!
Use your computer USB port to
connect to the outside world
Connect up to 16A to each of
the high power relays.
Board space for extra VDR noise
suppressors is provided and on
board push buttons can be used
to test/operate all the relays.
A dll for own software develop-
October 2009
• USB controlled relay card
• 8 high power relays: 16A each (resistive load)
• Optional VDR (type VDR300) transient suppression for use
with inductive loads.
• LED indication for power and relay action
• Manual operation for toggle, momentary or timer operation
(selectable through software)
• Timer settings up to 18 hours (dll function)
• Optional open collector connectivity (push button simulation)
• Power supply for relays: 9-10Vac or 12 to 14Vdc (500mA)
• DLL for own software development (download only)
• Event driven and open protocol
• Two way PC communication (USB Event return option)
• Dimensions: 160 x 107 x 30mm / 6.3 x 4.2 x 1.2"
8 CHANNEL USB RELAY CARD
K8090
Minimum system requirements:
◊ PC running USB compatible Windows version
◊ USB1.1 and USB2.0 full speed compatible
◊ Internet connection for software download
Optional DIN rail enclosure
B8006 (Note: cut-out the USB connector)