Velleman projects VM8201 Datasheet - Manual

Velleman ® NV, Legen Heirweg 33 - Gavere (Belgium)
Velleman.eu - Vellemanprojects.com - Velbus.eu
Velleman N.V.
MODULES
Features:
- Fully operate your 3D printer with this module! No computer needed (slicing of 3D
object and saving to SD-card still needs to be done on a computer).
- Prints .GCODE files that are saved on a regular SD-card (SD-card NOT INCLUDED).
- Encoder based control.
- Real time temperature display and control of the extruder and heated bed tempera-
ture.
- Connected to the K8200 controller board with the included flat cable, no extra
power supply needed.
- Enclosure .STL file available from K8200 website.
- Fully assembled and tested unit. Connection cable requires soldering.
- SD card slot.
- Reset button.
Specifications:
- 4 x 20 character LCD display with backlight.
- Dimensions: 80 x 50 x 45 mm / 3.15 x 1.96 x 1.77”
Perfectly suited for
our K8200 3D printer
Enclosure .STL file
available from K8200
website
SD card not included !
page 1 of 1
Component : VM8201
Stand alone controller for 3D printer
November 2013
Datasheet
������������������������� ���������������������