Spicer 23080S - Manual

1
Spicer ®
Drive Axles
ABIB-0107R2
Information Bulletin
Bulletin Type:
Parts/Service Information
Topic: Component Upgrades in 23080S Single Drive Axle Models
Affected Models: 21080S/D/A, 23080S/D/A, 26080S/D/A
In December 1999, the models listed above were built with upgraded parts not shown in parts IPL AXIP-0031. The
change was implemented with models having serial numbers beginning with H99277xxxx. These models have several
improved components with design changes that affect replacement service parts. The product improvements detailed
below include several new high performance bearings and the use of a different but common wheel differential spider.
INNER PINION BEARING UPGRADE:
The most notable change is to the inner pinion bearing. The bearing profile has changed and therefore requires the use
of a new cage & cup assembly. The new cage & cup assy part number is 129854 (cage#129853); this also contains the
new bearing cup 129848. This cage/cup can only be used with the new inner pinion bearing 129847 because of the
bearing profile design. For serviceability reasons, a
Cage & Cup Conversion Kit 510871 was released and now replaces
the old cage & cup assembly 127843. The cage/cup assembly (cage#127844) is no longer available for service.
Diff. Bearing Cone R . H Pinion Pilot Bearing Inner Pinion Bearing Pinion Bearing Cage
Revised Edition – July 2006