Spicer STOCKING RECOMMENDATION - NEW DESIGN 170-190-590 User Manual
Part number information

Dana Aftermarket
Dana Holding Corporation www.spicerparts.com
www.dana.com
1 of 3
NEW Dana
Part-No
Dana
Recom m ends
Stocking of
NEW Parts
New Part Description
OLD Dana Part-No.
(Before June 10, 2013)
504095
Yes
KIT-SHIFT FORK & PIN (140008 FORK#)
512944 or 512945
504097
Yes
KIT-DIFF LOCK SHIFT PARTS CONVERSION
512946 or 512947
140024
Yes
SLIDING CLUTCH
131104
504096
Yes
KIT-WHEEL DIFF SIDE GEAR w / WASHERS
513868
HS108-1
Yes
SIDE GEAR THRUST WASHERS (MPQ-2)
not used in OLD
models
300HS100-1
Yes
SIDE PINION THRUST WASHERS (MPQ-4)
not used in OLD
models
504126
Yes
KIT-BEARING D170, S170E
514238
504127
Yes
KIT-BEARING D170D
514011
504130
yes
KIT-BEARING R170, S170 4.10-7.17
514014
504132
Yes
KIT-BEARING R170D, S170D 4.10-7.17
514240
HAXL-PNI-42
STOCKING RECOMMENDATION -
NEW DESIGN 170-190-590 SERVICE KITS AND PARTS FOR
MODELS PRODUCED ON OR AFTER JUNE 10, 2013
PART NUMBER INFORMATION
DATE:
August 27, 2013
TO:
All Dana Aftermarket Group Spicer
®
Heavy Axle Customers
Affected Models: D/R170, D/R190, D/R590, S170, S190, S590
Below are two quick reference charts showing 170-190-590 NEW vs. OLD service part numbers and
Dana's stocking recommendations for the critical parts for the NEW design models.
Before the upcoming winter season approaches, you can quickly review the particular "usage" of the OLD
part numbers and begin to cross stock some of the NEW design part numbers. Doing so, you will be able
to service the NEW design axles if a carrier conversion is necessary or a repair situation is required.