Spicer Converting Single Draw Key Steer Axles to Dual Draw Key Configuration User Manual
Spicer, Steer axles, Information bulletin bulletin type: parts

Spicer
®
Steer Axles
ABIB-0505
Information Bulletin
Bulletin Type: Parts
Topic: Converting Single Draw Key Steer Axles to Dual Draw Key Configuration
Affected Models:
E-1200I, E-1320I, E-1460I
(3.5” Drop Beams Only)
• This bulletin is a revision to and replaces bulletin number ABIB-0208.
If converting a Dana steer axle from a single draw key design to a dual draw key design, a new beam along with a
kingpin service kit is required. Use the conversion charts below as they list the most current “E” series single draw
key steer axle beam part numbers and the new “Dual Draw Key” equivalent beam along with the required kingpin
hardware kit.
DUAL DRAW
KEY KINGPIN
Single Draw Key
OEM
Dual Draw Key
KIT
815319
Western Star
971698
815322
Peterbilt
971699
816247
International
971700
328348
816251
Freightliner
971701
(NOTE 1)
818835
Freightliner
972014
816944
Kenworth
971702
970862**
Peterbilt
N/A
819185
Mack
971703
DUAL DRAW
KEY KINGPIN
Single Draw Key
OEM
Dual Draw Key
KIT
818035
International
971700
818036
Freightliner
971701
328348
818041
Kenworth
971702
(NOTE 1)
818284 ***
Kenworth
N/A
818287 ***
Western Star
N/A
970878
Mack
971703
DUAL DRAW
KEY KINGPIN
Single Draw Key
OEM
Dual Draw Key
KIT
817656
Kenworth
971620
817648
Peterbilt
971621
328349
818291
Peterbilt
1462TB107 2
818963
Western Star
971622
(NOTE 1)
970603
Freightliner
971623
E-1460I Models
E-1200I Models*
E-1320I Models
NEW SPICER BEAM P/N
*** 5" Drop Beam w/ Small Pin Bore - Not Convertible.
NEW SPICER BEAM P/N
*NEW SPICER BEAM
P/N
ORIGINAL
PRODUCTION
BEAM P/N
ORIGINAL
PRODUCTION
BEAM P/N
ORIGINAL
PRODUCTION
BEAM P/N
** This is a Wide Track Design Beam
*E-1200I “Dual Draw Key” beams are 30
lbs heavier than original design.
NOTE 1: THE SERVICE KIT LISTED CONTAIN
"GARLOCK DX" PRE-SIZED KINGPIN BUSHINGS.
SERVICE KITS WITH OPTIONAL "BRONZE"
BUSHINGS ARE AVAILABLE. SEE PAGE 2 OF THIS
BULLETIN FOR PART NUMBERS.
This bulletin contains product information.
Dana Corporation is not committed or liable for canvassing existing product.