Renata SA 3V Lithium Coin Cells - DESIGNER'S GUIDE - Manual (Page 7)

1) Standard discharge
current: 100% of nominal
capacity is obtained by
discharging the cells at
this current rates.
2) The maximum current is
determined for a yield of
70% of the nominal
capacity with a cut-off
voltage of 2.0V, at 23°C.
For currents exceeding
those given above or
pulsed current, please
contact Renata.
3) In applications where the
battery is exposed to tem-
peratures above 70°C,
please contact Renata for
consultancy.
7 6
the swiss power source
Electrical characteristics
Model Nominal Standard Max. continuous Operating
capacity discharge current discharge current Temperature
(mAh) (mA) 1) (mA) 2) (C) 3)
CR1025 30 0.05 0.40 -40/+85°
CR1216 MFR 30 0.10 1.00 -30/+70°
CR1220 MFR 40 0.10 1.00 -30/+70°
CR1225 48 0.10 1.00 -40/+85°
CR1616 50 0.10 1.00 -40/+85°
CR1620 68 0.10 1.00 -40/+85°
CR1632 125 0.20 1.50 -40/+85°
CR2016 MFR 90 0.20 3.00 -30/+70°
CR2025 MFR 165 0.30 3.00 -30/+70°
CR2032 MFR 225 0.40 3.00 -30/+70°
CR2320 150 0.20 3.00 -40/+85°
CR2325 190 0.30 3.00 -40/+85°
CR2430 MFR 300 0.50 4.00 -30/+70°
CR2430 285 0.50 4.00 -40/+85°
CR2450N 540 0.80 3.00 -40/+85°
CR2477N 950 1.00 2.50 -40/+85°