Renata SA ICP401230UPR User Manual
Specifications dimensions
ICP401230UPR
Rechargeable Lithium Ion Polymer Battery Pack 3.7 V
Safety Circuit
Rev. Li Ion ICP401230 – 11.01
Renata SA
Tel. +41 (0)61 975 75 75
CH-4452 Itingen/Switzerland
Fax. +41 (0)61 975 75 95
www.renata.com
Specifications
Dimensions
Renata Type
IEC Designation
Part Number
Contact Method:
Safety Circuit
Nominal Voltage
Nominal Capacity
Minimum Capacity
ICP401230
ICP051331
100642
Wire AWG 30
Yes
3.7 V
130 mAh
125 mAh
(0.2C cut off 3.0 V at
20°C)
Internal Impedance
Thickness ( t )
Lenghth ( l
Width ( w )
Weight
Charging Characteristic
Voltage
Current Normal
Max. Charging Current
Temperature at Charging
Discharge Characteristic
Cut off Voltage
Max discharge Current
Temperature during Discharge
Cycle Life at Room Temperature
Storage Temperature
< 340 mΩ / 50% SOC
Max 4.5 mm
Max 31.0 mm
Max 12.7 mm
~ 3.5 g
CC/CV – Constant Current / Constant Voltage
4.2 V CV
0.5 C CC – 65 mA
1.0 C CC – 130 mA
0 °C …. 45 °C
3.0 V
2.0 C – 260 mA ( for non continues discharge )
1.0 C – 130 mA ( for continues discharge )
-20 °C … 60 °C
> 80% of minimum capacity after 500 cycles ( 0.5 C
charge, 0.5 C discharge )
-20 °C … 45 °C
( 0 °C … 30 °C recommended in case of storage for
more than 3 months)
Information and contents in this data sheet are for reference purpose only. They do not constitute any warranty or representation and
are subject to change without notice. For most current information and further details, please contact your Renata representative.