QNAP Security VioStor NVR (Version: 4.1.1) - Manual (Page 202)

Note: The status of an NVR will become
completed.
Step2:
Please make sure that the StorageExpansion QPKG has been installed on the NAS and
enable Storage Expansion.
1. Go to “Camera Setting”
page.F
202
The status of an NVR will become after storage expansion assignment is
Please make sure that the StorageExpansion QPKG has been installed on the NAS and
 “Storage Expansion” to configure relevant settings on the
after storage expansion assignment is
Please make sure that the StorageExpansion QPKG has been installed on the NAS and
to configure relevant settings on the