QNAP Security VioStor NVR (Version: 4.1.1) - Manual (Page 168)

168
6.6.2 Recording Settings
Information of camera list for supporting “User defined Multi-stream” and “Smart
Recording”, please refer to the list described in which section. For other cameras, please
refer to section 6.6.2.1 “Standard Recording”.
6.6.2.1 Standard Recording
Select a camera on the list and configure the recording resolution, frame rate, and quality.
Enable audio recording, manual recording, recording data retention, real-time digital
watermarking, and auto snapshot settings. Click ‘Apply’ to save the settings.
1. Video compression: Choose a video compression format for the recording.
2. Resolution: Select the recording resolution.
3. Frame rate: Adjust the frame rate for the recording. Note that the frame rate of the
IP camera may be affected by the network traffic.
4. Quality: Select the image quality for the recording. More disk space is required to
save higher quality recording.
5. Audio recording (optional): To enable the audio recording, click ‘Enable audio
recording on this camera’.
6. Estimated storage space for recording: The number of the estimated storage space for
recording is only for reference. The actual space required depends on the network