Asus Xonar DX - Manual (Page 77)

7 ASUS Xonar DX
I can’t hear the TV tuner audio from my speakers
Instructions:
. If you are using a traditional TV tuner card which has analog audio output,
please connect it to the Aux-In header on the audio card
2. Select Aux-In as the recording source and remember to turn on the digital
monitoring button on the recording mixer page
3. If you are using a TV tuner card which has digital audio output instead
of analog, please check that the sound is not muted and whether other
applications can play sound out. If you still have problem, please read the TV
tuner card’s software user guide.
I don’t see MIDI device (MPU-401) on Windows Vista. How could I use it?
Instructions:
Windows Vista doesn’t show MPU-40 MIDI port on system. However,
Xonar DX did support MIDI I/O and you can directly use it to connect MIDI
instruments on Vista without any setting.
I found no sound effects when playing 96K or 192KHz sound sources.
Instructions:
. Currently Xonar DX effects including Dolby support common 44.K, 4KHz
sound sources processing and will assure high-definition audio (96K/92KHz)
in hi-fidelity playback.
2. If you still want to have the effects, you can use some editing software
(Ableton Live, Cakewalk, CoolEdit, Soundforge, etc.) to convert the sounds
into 4KHz files.
3. Please note that the frequency meter on Xonar DX Audio Center panel will
not take effect either when the playback source is 96KHz or 92KHz sample
rate to prevent any processing distortion.