Introduction – Ohaus CARAT & GOLD LIGHT PORTABLE JEWELRY BALANCES Manual multi User Manual
Page 9

TAJ Carat / Gold Balances
EN-1
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the TAJ
Carat and Gold Balances. Please read the manual completely before using the balance.
1.1 Safety Precautions
Please follow these safety precautions:
•
Verify that the Power Adapter input voltage matches the local power supply voltage.
•
Use the balance only in dry locations.
•
Do not operate the balance in hostile environments.
•
Do not drop loads on the pan.
•
Do not place the balance upside down on the pan.
•
Service should be performed only by authorized personnel.
1.2. Controls
Figure 1-1. Controls.
TABLE 1-1. CONTROL FUNCTIONS.
Key Name
Function
• Primary function (Short Press) – If balance is Off, turn
On. If balance is on, perform Zero/Tare function
• Secondary function (Long Press) – Turn balance Off.
On-Zero
Off
Yes
• Menu function – (Yes) This key is used to accept the
currently displayed setting
• Primary function (Short Press) – Send the current display
value to serial port if installed
Cal
• Secondary function (Long Press) – Starts Span
calibration as available in Menu