Hotchkis 1402 Trailing Arms, Mount Braces, 68-72 GM A-Body User Manual
Hotchkis For the car
+
1401 / 1402 / 1403 ADJUSTABLE TRAILING ARM MOUNT BRACES
1401 – 78-88 GM A/G-BODY
/
1402 – 68-72 GM A-BODY
/
1403 – 64-67 GM A-BODY
Thank you for your purchase.
Please call us at (562) 907-7757 if you have any questions regarding your Hotchkis Performance products.
Visit us online @
INSTALLATION OF HOTCHKIS PERFORMANCE
ADJUSTABLE TRAILING ARM MOUNT BRACES
ALWAYS USE CAUTION!
- AND MAKE SURE THE CAR IS SECURE ON JACK STANDS.
1)
Place the vehicle on a level surface. Block the front tires.
2)
Use a jack to lift the rear of the car until the suspension is at full droop and the tires are no
longer contacting the ground. Support the rear of car on jack stands.
3)
Place the jack under the differential. This will be used later to lower or raise the axle for ease
of installation.
4)
Use a ratchet or wrench to remove rear shock absorbers at the lower mounts. This should free
up the springs to be removed.
Document Outline
- ADJUSTABLE TRAILING ARM MOUNT BRACES
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 1TUwww.hotchkis.netU1T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?