Hotchkis 22423 EVO 8-9 Rear Sport Sway Bar User Manual
Installation of the rear sway bar
2003-Up Mitsubishi EVO 8
Thank you for your purchase from our line of Mitsubishi Evo 8 parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
of your Hotchkis products. Visit us on the web
Installation of the Rear Sway Bar
1.
Securely block the front wheels of the vehicle. Use a jack to lift up the rear of the
vehicle and support with jack stands. You should not remove the rear wheels.
2.
Unbolt the exhaust hanger by loosening and removing the two retaining bolts.
Retain the hardware for later re-installation. Proceed to remove the back portion
of the exhaust system by loosening the system from the rubber exhaust hangars.
You will be re-installing this system later, so take care not to damage your
exhaust when removing it
Document Outline
- Installation of the Rear Sway Bar
- Spacer
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0Twww.hotchkis.net0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?