Hotchkis 2221 1997-1999 Dakota 4x4 Sport Sway Bars User Manual
Up dodge dakota
2221 (97-99) / 2247 (00+) 4WD SPORT SWAY BAR SET
97-UP DODGE DAKOTA
Thank you for your purchase from our line of Dodge Dakota & Durango suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service and installation
of your Hotchkis Performance products. Visit us online @
This installation will require:
Hydraulic jack, jack stands, torque wrench
Rotary grinder or disk sander
The following wrenches or sockets: 15mm, 16mm, 17mm, 21mm, 3/4"
INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR
1)
Securely block the rear wheels of the vehicle. Use a jack to raise the front and support with jack
stands to the frame. You do not have to remove the front wheels for this installation.
2)
Use a 15mm socket or wrench to loosen and remove the bolts holding the front skid plate in
place on the vehicle and remove the skid plate. Retain the skid plate and stock hardware for
later re-installation.
Document Outline
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?