Hotchkis 2273 Sway Bars, Set, 67-70 GM B-Body, Sport User Manual
This installation will require drilling
2253/2273 FRONT AND REAR SPORT SWAY BAR SET
65-70 CHEVROLET B-BODY
Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
Performance products. Visit us online @
This installation will require drilling
new mounting holes for both the front and rear
sway bars. Please read instructions carefully to avoid unnecessary drilling.
INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR
1)
Securely block the rear wheels of the vehicle. Use a jack to raise the vehicle and support with
jack stands only if you need additional clearance under the vehicle. You will have to lower the
vehicle onto its wheels in a later step to remove and install the front sway bar.
2)
Unbolt the stock sway bar bushing brackets. Remove the bushings once the brackets are loose.
Unbolt and remove the end links from each end of the bar. The bar should now be free moving
and is held in the vehicle only by the two holes in the frame. Retain the stock bushing retainer
bolts. You may discard the end links, as they will not be re-used.
Document Outline
- INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?