Hotchkis 2236R Sway Bars, Rear, 70-81 GM F-Body, Sport User Manual
2236r sway bar installation instructions, Rear sway bar installation
2236 GM F-Body Stabilizer Bar Installation Instructions
Page 1 of 16
2236R Sway Bar Installation Instructions
Thank you for your purchase of this Hotchkis Performance product. Your stabilizer bar set was
designed with the performance and durability you’ve come to expect from Hotchkis Performance.
Rear Sway Bar Installation:
1R. Jack up the vehicle and properly support with jack stands or lift jacks. Make sure the rear end
is supported with the vehicle’s load on the leaf springs. This is to ensure you install the rear
bar in the proper position.
2R. Take the bushings and grease the inner surface with the included white silicon grease.
3R. Install the bushings on the bar. (5) Place the bracket over top of the bushing. (6)
Table of contents
Document Outline
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?