Hotchkis 22410 Lexus IS300 Sport Sway Bars User Manual
Installation of hotchkis tuning front sway bar
22410 STREET SWAY BAR SET
2001-UP LEXUS IS300
Thank you for your purchase from our line of Lexus parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding the service or installation
of your Hotchkis products. Visit us on the web @
• This installation will require:
Hydraulic jack, jack stands, torque wrench
The following wrenches or sockets: 10mm, 12mm, 14mm
Allen wrenches or hex sockets: 5mm
Phillips head screwdriver
INSTALLATION OF HOTCHKIS TUNING FRONT SWAY BAR
1)
Securely block the rear wheels of the vehicle. Use a jack to raise the front end of the vehicle
and support it on jack stands. Observe the stock front sway bar installation for reference.
2)
Remove the plastic splashguard from under the front of the vehicle. It is held in place by several
small screws Use a 10mm socket or wrench to remove the screws. Retain the hardware and
splashguard for re-installation.
Document Outline
- MOVE ON TO THE REAR BAR INSTALLATION
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U1TUwww.hotchkis.netU1TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?