Hotchkis 22825R BMW E46 Sport Sway Bar, Rear User Manual
Hotchkis For the car
BMW E46 3 SERIES
SPORT SWAY BAR SET
# 22825
Thank you for your purchase from our new line of BMW E46 parts.
Please call us at (877) 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis products.
Visit us online @
Tools required:
- Hydraulic jack, jack stands, or 4-post lift (shown) torque wrench
- The following sockets or wrenches: 12mm, 13mm, 14mm, 16mm, 17mm,
- The following Allen wrenches: 6mm
INSTALLATION OF HOTCHKS FRONT SWAY BAR
1)
Drive the front of the vehicle onto floor ramps and securely block the rear wheels of the vehicle. If
ramps are not available, use a jack to lift up the front of the vehicle and use jack stands to support it. Do
not remove the front wheels during installation for safety.
Document Outline
- BMW E46 3 SERIES
- INSTALLATION OF HOTCHKS FRONT SWAY BAR
- INSTALLATION OF HOTCHKIS REAR SWAY BAR
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?