Front bar installation – Hotchkis 89009 TVS System, Extreme, 78-88 GM A, G-Body, Small Block, 1" Drop User Manual
Page 20

2282 1964-1972 GM A Body
Hotchkis Sport Suspension LLC.
1
2281
1978-1988 GM A/G Body
Extreme Sway Bar Kit
Thank you for your purchase from our new line of GM parts.
Please call us at (877) 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis products.
Before You Start
Please read this entire instruction manual before starting. Being prepared with the right tools
and procedures will aid in the ease of this installation.
:
This sway bar kit requires Hotchkis Trailing Arms (p/n 1301) to be installed beforehand. You
will not be able to install this kit using stock trailing arms due to end link interference.
Front Bar Installation
1.
Look carefully at the current installation.
2.
This installation can be performed without removing the front wheels. Always use
proper safety devices such as jack stands or lift jacks to properly support the vehicle.
3.
Loosen front bushing retaining bolts, leave a few threads engaged to support the bar.
4.
Remove the factory end link from the car.
5.
Support or hold the center of bar and carefully remove front bushing bolts.
6.
Remove factory bar from vehicle, taking note of the placement of the swaybar
bushings.