Hotchkis 22441 Sport Sway Bar Set, 08+ 370Z, G37, G37S, G35 User Manual
Installation of hotchkis front stabilizer bar
22441 FRONT AND REAR SPORT SWAY BAR SET
Infiniti G37/S Coupe & G35/S Sedan
Thank you for your purchase from our Hotchkis line of suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis products.
Visit us on the web @
INSTALLATION OF HOTCHKIS FRONT STABILIZER BAR
1)
Securely block the rear wheels of the vehicle. Use a jack to raise the vehicle and
support with jack stands.
2)
Please look at the original front antiroll bar and note the orientation of the front bar. You
will want to install the new Hotchkis bar in the same manner.
3)
Remove the factory plastic undertray from the car with a 10mm socket on the bolts, and
a small screwdriver to pry open the plastic trim plugs.
Table of contents
Document Outline
- INSTALLATION OF HOTCHKIS FRONT STABILIZER BAR
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0Twww.hotchkis.net0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?