Hotchkis 2290 SSR Sway Bar Set User Manual
Hotchkis For the car
2290 FRONT AND REAR SPORT STABILIZER BAR SET
Chevy SSR
Thank you for your purchase from our line of classic suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
Performance products. Visit us online @
Installation of Hotchkis Performance Front Stabilizer Bar
Before starting this installation, please read the entire installation instructions.
This will make the installation flow much smoother.
1)
Securely block the rear wheels of the vehicle. Jack the front end up and
safely secure the vehicle with jack stands on the frame. Observe the
stock front stabilizer bar orientation for future reference.
2)
Remove the FRONT PASSENGER side wheel.
3)
Next, remove the lower end link nut for each side using a 21mm Wrench
and a 7mm Allen Wrench. Save the hardware for reinstallation. Note:
Only the bottom ball joint has a washer.
Document Outline
- Installation of Hotchkis Performance Front Stabilizer Bar
- INSTALLATION OF HOTCHKIS PERFORMANCE REAR SWAY BAR
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?