Hotchkis 2203 1982-1992 GM F-Body Sport Sway Bars - Manual

82-92 F-Body rear & front sway bar Page 1 of 5
2203 Sport Sway Bar Set
82 – 92 Camaro/Firebird
Front Bar Installation
1. Look carefully at the current installation.
2. This installation can be performed without removing the front wheels.
Always use proper safety devices such as jack stands or lift jacks to
properly support the vehicle.
3. Loosen front bushing retaining bolts, leave a few threads engaged to
support the bar.
4. Remove the factory end link from the car.
5. Support or hold the center of bar and carefully remove front bushing
bolts.
6. Remove factory bar from vehicle, taking note of the placement of the
sway bar bushings.
7. Using the included white silicone grease, grease the inside of the urethane
1 7/16” in sway bar bushings. (The silicone grease can be cleaned up
with WD40.)