Hotchkis 12834 BMW E90-E92 Sport Rear Camber Links User Manual
Installation of rear camber links
Thank you for your purchase from our new line of BMW parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
1. Raise vehicle and support with jack stands. Remove rear wheels. Place jacks under the rear lower
control arms, and jack up slightly to take load of the upper control arms.
2. Remove the ABS wire retaining clip from the upper control arm.
Installation of Rear Camber Links
Rear Camber Link Kit 12834
06-UP BMW E90-E93
Table of contents
Document Outline
- Installation of Rear Camber Links
- Rear Camber Link Kit 12834
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?