Hotchkis 2251 1994-Up Mustang Sport Sway Bars - Manual (Page 4)

4
7) Remove the fuel vapor lines from the clips on the front of the gas tank. Use a zip tie to
secure the lines up out of the way. There is a small hole in the frame that you can use
for this.
You should also zip tie the lines together near the fuel filler spout to help pull the lines further
away from the sway bar end link.
8) Hold the sway bar up to the end links and place a bolt with the small washer through
from the bar side. Place the large washer over the bolt as it comes through and place
the nylock nut over the end to keep the bolt from pulling through.
DO NOT push the
bolt through from the outside of the bar. The bolt is long enough that it can rub
against the gas tank if it is put in backwards.