Hotchkis 2254F Sway Bars, Front, 70-74, Mopar E Body User Manual
Installation of hotchkis front sway bar
Thank you for your purchase from our new line of Mopar parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
IMPORTANT: PLEASE READ THE ENTIRE
STARTING THIS INSTALLATION. THERE’S SOME HOLE DRILLING INVOLVED
INSTRUCTION MANUAL BEFORE
AND IT WOULD BE A SHAME TO MAKE ANY UNNECESSARY HOLES DUE TO
INSTALLER ERROR. METAL GRINDING IS ALSO NECESSARY.
1F
Raise the Vehicle
Raise the vehicle and safely secure it on jack stands. Remove either the driver or passenger
side wheel.
2F. Disconnect End Lniks
Disconnect the stock sway bar end links form the lower control arm and the sway bar
3F. Disconnect Bushing Brackets
Disconnect the bushing bracket from the subframe bushing mounts.
4F. Remove Subframe Bushing Mounts.
Unbolt the 2 nuts and remove the subframe bushing mounts.
Installation of Hotchkis Front Sway Bar
Sport Sway Bar Kit 2254
70-74 Chrylser E-Body ‘Cuda, Challenger
Document Outline
- Installation of Hotchkis Front Sway Bar
- Sport Sway Bar Kit 2254
- Installation of Hotchkis Rear Sway Bar
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?