beautypg.com

10f install the bushings & brackets, 11f. install end links – Hotchkis 80112 1970-1974 Plymouth Cuda TVS System User Manual

Page 31

background image

10F Install the Bushings & Brackets

Lube the inside surface of the new bushings with the provided grease. Install the bushings on

to the bar. Install the bushing bracket onto the bushing. Due tolerances in subframes, you

may need to install one or two

1/8” spacers between the bushing and the subframe bushing

mounts. Please check the clearance the bar has inside the k-member. If it needs to move up

or down, use add or remove the spacers to achieve proper clearance. Use the provided 3/8

socket head bolts and nuts. These are course thread. Use the flat cut washers on the socket

head side and insert the bolts from the bottom

11F. Install End Links