Herman Miller Celle Chairs - Disassembly For Recycling User Manual

Page 8

© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Celle are among the registered trademarks of Herman Miller, Inc.

Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

Part no. 1b9vtd rev A.

27. Slide arm pad to
outermost position and insert
straight head screwdriver
against inside of retainer
clip. Pry clip outward while
lifting up on arm pad.

28. Remove arm pad
properly.

29. Using ratchet and T-27
Torx bit, remove and save
screws (noted) that secure
one side of seat linkage
assembly to tilt assembly.
Repeat for opposite side of
seat linkage assembly.

30. Using ratchet and T-40
Torx bit, remove seat linkage
pivot bolts and bushings.
Remove seat linkage side
covers from tilt assembly.