Herman Miller Equa 2 Chairs - User Adjustments - Manual

HermanMiller Equa 2 ® Chair Adjustment Guide 1
Seating that
performs for you.
HermanMiller
Equa 2
®
Chair
Seat Height: Paddle-shaped lever on right side
To raise:
Take your weight off chair, lift lever up.
To lower:
Lift lever up while seated.
At the proper height, your feet should rest flat on the floor.
Tilt Tension: Knob under seat on front of chair
To increase:
Turn knob to the left.
To decrease:
Turn knob to the right.
Set the tilt tension to control the resistance you feel when reclining.
Tilt Lock: Paddle-shaped lever on the left side of tilt mechanism
Lumbar Depth: Pump pad and release button on front of right back support
To lock upright:
While seated upright, swing
paddle back.
To release:
Swing paddle forward.
Engage the tilt lock when you want to sit in an upright position.
To increase:
While seated, lift your weight off back
of chair, push pump pad in to inflate
lumbar support and achieve desired
level of support.
To decrease:
While seated, press release button to
deflate lumbar support and achieve
desired level of support.
Adjust the lumbar depth so that it comfortably supports the natural curve
of your spine.
Only available on some models.
Only available on split-pad models.