beautypg.com

Herman Miller Mirra Chairs - Disassembly For Recycling User Manual

Page 8

background image

Z

© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Mirra, Co/Struc and Embody are among the registered trademarks of Herman Miller, Inc.

TM

Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

8

Z

Part no. 1b9rtg rev B.

27. Remove lumbar bow.

28. By hand, separate right side

cover from left side cover. Some

force and slight twisting of cover will

be necessary to disengage S-clips

holding covers together. Repeate

same step for opposite side.

29. Pull up on hinged top at

center, to disengage retaining

loops and open hinged top.

If required.

26. Remove lumbar adjustment

knob by removing the T-40

Torx screw and by pulling knob

straight off by hand.