beautypg.com

Herman Miller Mirra Chairs - Disassembly For Recycling User Manual

Mirra, Disassembly for recycling

background image

Z

© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Mirra, Co/Struc and Embody are among the registered trademarks of Herman Miller, Inc.

TM

Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.

1

Z

Part no. 1b9rtg rev B.

Y

Mirra

®

Disassembly for Recycling

Tools Required:

Materials Identification and Segregation:

Disassembly Steps:

Power Driver

Safety Glasses

Rubber Mallet

Ratchet

T-40

Torx Bits

Flat Blade

Screwdriver

2 lbs Hammer

Where possible, plastic components are marked with ASTM recycling codes.

Use these codes to identify material type for recycling. Non marked components

should be treated as mixed plastic. Ferrous metals can be identified using a small

magnet for recycling. Non-ferrous metals should be separated and recycled

separately.

1. Using T-40 torx bit, remove

both hip pivot bolts securing

seat assembly to arm support

stems.

2. By hand, pull seat assembly

forward to disengage seat from

chair tilt mechanism.