Scan with ease – GE Healthcare LOGIQ S8 User Manual
Page 6
+
Not for sale in the United States. Not cleared for use by the United States FDA.
©2013 General Electric Company – All rights reserved.
General Electric Company reserves the right to make changes in specifications and
features shown herein, or discontinue the product described at any time without notice
or obligation. Contact your GE Representative for the most current information.
GE and GE Monogram are trademarks of the General Electric Company.
GE Medical Systems Ultrasound & Primary Care Diagnostics, LLC, a General Electric
company, doing business as GE Healthcare.
* Trademark of General Electric Company.
DICOM is a registered trademark of the National Electrical Manufacturers Association.
Third party trademarks are the property of their respective owners.
GE Healthcare
9900 Innovation Drive
Wauwatosa, WI 53226
U.S.A.
www.gehealthcare.com
1
Data provided from a internal study performed by a third party sonographer.
2
Data provided from a internal study performed by GE engineers comparing to
the prior version of the LOGIQ S8.
Europe
GE Healthcare
Beethovenstr. 239
D - 42655 Solingen
T 49 212 2802 0
F 49 212 2802 28
APAC
GE Healthcare Asia Pacifi c
4-7-127, Asahigaoka,
Hino-shi, Tokyo
191-8503 Japan
T +81 42 585 5111
Scan with ease
• Fully adjustable console and fl at-screen
• Smooth wheel system rolls easily across carpets or hard surfaces,
and maneuvers easily in confi ned spaces
• Four active pin-less ports and one parking slot enable convenience
when working through a wide range of clinical applications
• Probe holders on both sides of the operating panel keep the needed
transducers available at your fi ngertips
• Large touchscreen enables easy customization of settings and
commands to user preference
The LOGIQ S8 follows the Society of Diagnostic Medical Sonographers
(SDMS) ergonomic guidelines.
Having a streamlined and innovative design is not
enough, it should also promote exceptional ease of
use and user comfort. LOGIQ S8 offers incredible
scanning comfort and features designed with the
user in mind.
JULY 1, 2013 | DOC0999054