EVS XTnano Version 10.04 - January 2011 Configuration Manual - Manual (Page 55)

XTnano – Version 10.04 – Configuration Manual
EVS Broadcast Equipment SA – January 2011
Issue
10.04.A
47
EVS Controller p.6.2
[F1]Record key : Start REC + Live
[F3]VGA & RMT Sync : No
[F4]PGM/PRV Mode : Enable
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.12.7 R
ECORD KEY
Possible values: Start REC + Live (default) / Live
This parameter changes the function of the RECORD key on the remote:
• Start REC + Live: Pressing the RECORD key starts the record process and
switches to LIVE mode.
• Live: Pressing the RECORD key only switches to last recorded picture, but the
record is not restarted if it has been previously stopped by the operator.
3.12.8 VGA & RMT S
YNC
Possible values: No, Yes
This parameter selects whether the current clips machine, page and bank of VGA
screens and EVS Remote Panel must be synchronized.
Value Meaning
No (Default) Clip machine, page and bank can be selected independently on
the VGA screen and on the EVS Remote Panel.
Yes Clip machine, page and bank are synchronized between VGA
screen and EVS Remote Panel. Connecting to the clips of a
network machine or coming back to the clips of the local
machine, or selecting a new page or bank on one side will be
automatically reflected on the other.
3.12.9 PGM/PRV M
ODE
Possible values: Enable (default) / Disable
When this setting is enabled, the user has the possibility to select the PGM/PRV
mode on the LCD display as a function accessible from the A button on the
Remote main menu. Otherwise, the PGM/PRV mode selection is not accessible
from the A button.