EVS XTAccess Version 1.14 - July 2010 User Manual - Manual (Page 66)

XTAccess Version 1.14 – User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – July 2010
Issue 1.10.D
1. As transcoding is not yet available with XML job file, you have to configure
XTAccess in transcoding mode.
2. An external system, for example IPDirector, sends an XML file to XTAccess
to request the backup of a given clip or rewrap of a given file in native EVS
codec format
3. XTAccess processes the XML file:
a. It gets the clip content from EVS or the file that has to be backed or
rewrapped up.
b. It generates a backup file of the clip or a rewrap file
At the same time, XTAccess transcodes the clip in the selected codec
format. See configuration below.
c. It stores the backup file/rewrap file in the target folder specified by the
external system. The metadata of the clip are either included in the file
(in EVS MXF) or sent via an XML file.
Remark:
There is only one status for the transcoding on the fly. So if the backup or the
transcoding fails: The whole job will fail.
15.2 CODECS SUPPORTED
See XTAccess_codecs document
15.3 LOCAL XTACCESS SETTINGS (NON XML)
Transcoding XTAccess settings are not supported by XML. They must therefore be
specified in the local settings of the XML Jobs Scan (see section 7.3.3 ‘XML Scan
Settings’ on page 27).
• Create Additional Codec File: Select this option if you want to transcode on
the fly.
o
Target Path: This is the destination target path used for the transcoding
file. This path can be entered manually or by browsing Windows Explorer
with the associated button.
o
Transcoding profile: This is the XML profile used by XTAccess which
defines the codec and parameter of the codec used by XTAccess to
Transcode the file. You can find some encoder profiles into the
“C:\Program Files\EVS Broadcast
E q u i p m e n t \ X T A c c e s s \ E n c o d e r P r o f i l e s \ D e f a u l t E V S
P r o f i l e s
” folder.
65