EVS XTAccess Version 1.14 - July 2010 User Manual - Manual (Page 12)

XTAccess Version 1.14 – User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – July 2010
Issue 1.10.D
6. You can select here the different XTAccess components:
• Install VCRedist: If you install XTAccess for the first time on this
workstation, you need to install Microsoft Visual C++ Redistributable
application by selecting “Install VCRedist”. For future installations or
upgrade, you may deselect this option to reduce installation time.
• Install XSecure Manager: This option will install the EVS License software
(EVS Licenses XSecure code are necessary for the transcoding jobs and
rendering of playlists).
• Install XTAccess Encoders : This option will install all the codec dll
necessary for the transcoding jobs and for the rendering of playlists.
• Install XTGateway: This option will install XTGateway. XTGateway is a
Windows service required for rendering playlists with XTAccess.
• Install AppGuard: This option will install AppGuard. AppGuard will restart
automatically XTAccess in case of crash.
• XTAccess Inscription to the EVS SNMP: This option will inscribe
XTAccess to the EVS SNMP Agent (the EVS SNMP Agent must be installed
on the computer).
• Install EVS SNMP Agent: If you install XTAccess for the first time on this
workstation, you should select this option to install the EVS SNMP Agent.
Then press NEXT.
11