EVS Xedio Approval Version 4.2 - June 2012 User Manual - Manual (Page 17)

Xedio Suite Version 4.2 – User Manual - Xedio Approval
EVS Broadcast Equipment – June 2012
Issue 4.2.B
11
The vertical lines represent the different positions:
Line color Meaning
Green line Mark IN point (only visible when a clip is loaded)
Red line Mark OUT point (only visible when a clip is loaded)
Blue line Current position within the media (Nowline)
All of these lines can be moved to a new position by selecting them with the
mouse and dragging them to the desired position.
The middle area, represented by a dark grey zone, is a shuttle control. This zone
shows the portion of the media out of the whole media included in the top area
and the position in the whole media:
When a media or an edit has just been loaded, the top area represents the whole
media: The dark grey area represents the whole media and covers the whole
space in the middle area.
When a clip has just been loaded, the top area represents the whole media. The
dark grey area represents the whole media and covers the whole space in the
middle area.
• A double-click on the dark grey area will toggle the portion covered by the
upper area from the entire media length to the clip length (between Mark IN
and Mark OUT). The dark grey area is reduced to represent the clip length and
position with regard to the whole media.
• If you click on the dark grey area and drag it, you shift the portion of media
included in the top area. The dark grey area is enlarged or reduced
accordingly.
In this case, if the portion of the upper area covers only a part of the media, the
nowline may disappear. Then, a red indicator, on the left side or on the right
side of the media bar will be displayed.
A click on that indicator will focus on the nowline.