EVS XTAccess Version 1.17 - May 2012 User Manual - Manual (Page 79)

XTAccess Version 1.17 – User Manual
EVS Broadcast Equipment – May 2012
Issue 1.17.C
71
18.3 Transocode one file to file
XTAccess
DNxHD IMX
1. Create a “standard” target destination into IPD
2. Create a Scan XML
3. Click on the XML Scan Settings button and configure the XTAccess settings
a. Select “Transcode the source …"
b. Select the DNXHD profile in the C:\Program Files\EVS Broadcast
Equipment\XTAccess\Encoder Profiles\Default EVS Profiles 2.0
folder
Result
Each new rewrap job from IPD will create:
•
one DNxHD transcoded file in the target folder configured into IPD