EVS XFLY Streamer Version 1.02 - April 2013 User Manual - Manual (Page 16)

Issue 1.3 XFLY.STREAMER – Version 1.02 – User Manual
EVS Broadcast Equipment – April 2013
16
Button/Field Description
Duration This field displays the duration computed from the TC IN
and TC OUT values, or, if TC OUT is not defined,
according to the maximum duration defined in the
Settings area.
Record button The Record button allows to start the backup of the
recoding trains on all selected channels. The backup
record starts instantly.
The Record button lights red when the recording is in
progress.
See section "How to Record Streams" on page 22.
Stop button The Stop button allows to stop the backup of the record
trains on all selected channels. As the backup files need
to close properly, it can however take some time before
the job is finalized. During this time, the message
"Finalizing..." will be displayed in the status area.
The Stop button lights blue when the stop command has
been enabled but the recording is still finalizing.
See section "How to Record Streams" on page 22.
Status This field displays information and error messages
related to the current operations.
5.4.2 Timecode Edition Rules
Note
XFly. Streamer checks the validity of timecode values manually entered by
user. If a wrong value is entered, the TC field is cleared.
Click in the TC IN field and enter manually a TC value.
The E/E button (to return to current TC) appears
Clicking the Record button starts all recordings from this TC IN value.
The Duration field is updated according to the maximum duration defined in the Settings
area.