Storage and processing device selection, 1 storage and processing device selection – EVS XFLY Streamer Version 1.02 - April 2013 User Manual User Manual

Page 13

XFLY.STREAMER

– Version 1.02 – User Manual

EVS Broadcast Equipment

– April 2013

Issue 1.3

5.1

Storage and Processing Device Selection

Thanks to BONJOUR protocol, at start-up, XFLY systems are detected and listed in a
drop-down list.

Clicking on the arrow on the right will display all systems detected. In the dropdown list,
XFly is identified as Machine_Name + EVS_SN.

Note

The local device is displayed on the top of the list with bold letters.

Once a system is selected its capacity information and a related diagram are updated:

The second drop-down list lists all XTAccess detected on the local network via BONJOUR
protocol.

Clicking on the arrow on the right will display all processing devices detected. In the drop-
down list, XTAccess is identified as Machine_Name+EVS_SN+version number.

Note

The local XSquare is always displayed on the top of the list with bold letters.

Remaining Capacity

Total Capacity