AASTRA 6737i Installation Guide EN - Manual (Page 19)

Other Phone Features
41-001371-00 Rev 01 – 07.2011
15
Other Phone Features
Set Audio
The 6737i allows you to use a handset, a headset, or speakerphone to handle incoming and outgoing calls. The audio
mode option provides different combinations of these three methods to provide maximum flexibility in handling calls.
There are four audio mode options to choose from:
Headset Mic Volume
To adjust the headset microphone volume, press Advanced after selecting the audio option, and then select the Low,
Medium, or High volume level.
Adjusting the Volume
Audio Mode Option Description
Speaker This is the default setting. Calls can be made or received using the handset or speakerphone. In handset audio mode,
pressing the Speakerphone key on the phone switches to speakerphone. In Speaker audio mode, lift the hand-
set to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset or headset. Calls can be switched from the
handset to headset by pressing the Headset key on the phone. To switch from the headset to the handset, lift
the handset.
Speaker/Headset
Incoming calls are sent to the speakerphone first when the Speakerphone/Headset key is pressed. By pressing
the button again, you can switch back and forth between the speakerphone and the headset. At anytime, lifting the
handset switches back to the handset from either the speakerphone or the headset.
Headset/Speaker
Incoming calls are sent to the headset first when the Speakerphone/Headset key is pressed. By pressing the but-
ton again, you can switch back and forth between the headset and the speakerphone. At anytime, lifting the handset
switches back to the handset from either the headset or the speakerphone.
• Pressing the volume button adjusts the receiver, headset, speaker, and ringer volume.
• To adjust the ringer volume, leave the handset in the cradle and press the volume button
while there is no active call. There are 10 settings for the ringer including Off — the display will tempo-
rarily indicate the current ringer volume setting
• To adjust the handset volume, lift the handset and press the volume button while the hand-
set is off hook. The handset will remain at this volume until it is adjusted again.
• To adjust the headset volume, press the volume button while the headset is activated (acti-
vate the headset by pressing ; ensure headset audio mode is set). The headset will remain at this
volume until it is adjusted again.
• To adjust the speaker volume, press the volume button while the speaker is activated (acti-
vate the speaker by pressing ; ensure speakerphone audio mode is set). The speaker will remain
at this volume until it is adjusted again.