AASTRA 4422 IP Office (SIP) for MX-ONE User Guide - Manual (Page 82)

Settings
Dialog 4422 IP Office 82
Change ring signal for the Line/Hold key
The Line/Hold key is programmed by your system administrator,
however you can change the type of ring signal from your phone.
Change the type of ring signal
Settings
Ô
Press.
The
Function Keys menu or the Programmable Keys menu is
framed.
Press.
Ô
Press the Line/Hold key.
The Line/Hold key is shown together with the current type of ring
signal for the key.
ì
Press (+) to change.
ì
Press to change between the ring signals.
• Silence.
• Periodic (repetitive) ring signal.
• Delayed periodic ring signal.
• One muted ring signal. Only one ring signal with a low level.
• One muted delayed ring signal.
Note: The Clear key can be used to leave the menu without
saving the changes.
Press to store the framed ring signal.
Press to return to the previous menu,
or
Settings
Х Ф
press to return to idle mode.
Line/Hold key
Periodic
Silence
Periodic