Blue Ox Diamond Hitch Frequently Asked Questions - Manual

One Mill Road, Industrial Park • Pender, Nebraska 68047
Phone 888.425.5382 • Fax 402.385.3360
www.blueox.us
Diamond Hitch Frequently Asked Questions
What is the difference between the Diamond Hitch versus other gooseneck hitches?
Where the ball is in a short bed truck is a BIG difference when you are turning in a tight place with a trailer
having a wide neck. The Diamond Hitch is 1” to 4” in front of the axle so that means you can turn sharper. The
others are between 4”to 8” in front of the axle so you can only turn about half the distance before you hit the
cab.
What difference does it make with the location of your hole in the bed verses others?
Where the ball is in a short bed truck is a BIG difference when you are turning in a tight place with a trailer
having a wide neck. The Diamond Hitch is 1” to 2” in front of the axle so that means you can turn sharper. The
others are between 4”to 6” in front of the axle so you can only turn about half the distance before you hit the
cab.
Why should I spend the extra money for this Gooseneck Hitch over the competition?
Where we mount the Diamond Hitch on the frame of the pick up is one of the many reason. The locking
mechanism is located on the hitch ball, saving installation time and resulting in a visual lock. We install the
Diamond Hitch 1” to 4” in front of the axle, while others are about 4” to 8” in front of the axle. What that means
is you can turn sharper before hitting the cab or busting the back window with the trailer. Also, you don’t have to
put the tailgate up when you are in the middle of hooking up to your trailer because the ball is to far forward
and you hit the front of the trailer with the tailgate.
Will the Diamond Hitch cause more wear on my trucks suspension and chassis? Why not?
No, the trucks are made to haul the load in the back of the truck, not the front. So when you have the hitch too
far in front of the rear axle you are putting a lot of extra weight on the front axle; in turn wearing out the front
end faster then normal. Hitch location on Diamond Hitch is actually in the optimal location to reduce too much
weight transfer to the front end.
Why would I buy this over any other? Is the warranty different?
For the simple unlocking and locking of the ball. We believe that if you have to get in the back of the truck to
turn over the ball you should have the lock there too; not in the fender well. Also, the safety of that locking
mechanism is visible so you can see that the ball is locked in the cylinder. Blue Ox has a limited lifetime
warranty on the Diamond Hitch with the backing of 24/7 customer care to help out with any problems you
might have.
That is the weight rating?
30,000lb Gross Towing Weight.