beautypg.com

Blue Ox BRK4000 User Manual

Page 4

background image

BRK4000

Push Cylinder BrakeSafe™

Installation Instructions

405-0312 Rev A

Page 4 of 6

9/27/13

Push-Cylinder Installation

5. Install the brake pedal brackets 3/4” above the brake pedal using the 1/4”-20 x 1-3/4” hex bolts and 1/4”-20

lock nuts. Select a suitable location for the Anchor Bracket, preferably as close to the drivers seat as you

can go, still being able to reach the brake pedal. The bracket also needs to be in line with the brake pedal.

Remove the air cylinder assembly from the anchor bracket by pulling the quick release pin and screw the

bracket to the floor with the #10 screws supplied. Reinstall the air cylinder assembly back into the anchor

bracket. Loosen the 5/16” plastic knob and adjust the length of the assembly until the pin on the end of the

assembly hooks onto the pedal brackets. Retighten the plastic knob on the assembly.

3/4”

Pedal Brackets

Anchor Bracket

Air Cylinder

Assembly

Plastic Knob

Figure 4