beautypg.com

Symbols – Bosch GAS 35 L AFC Professional User Manual

Page 16

background image

16 | English

1 609 92A 0D1 | (23.7.13)

Bosch Power Tools

Connect the vacuum cleaner to a properly earthed

mains supply. The socket outlet and the extension cable
must have an operative protective conductor.

Before each use, check the vacuum cleaner, cable and

plug. Do not use the vacuum cleaner when defects are
detected. Do not open the vacuum cleaner yourself and
have it repaired only by qualified personnel using orig-
inal spare parts.
Damaged vacuum cleaner, cables and
plugs increase the risk of an electric shock.

Do not drive over, crush or stretch the cable. Do not

pull the cable to unplug the plug from the socket outlet
or to move the vacuum cleaner.
Damaged cablesin-
crease the risk of an electric shock.

Before maintaining or cleaning the vacuum cleaner,

making any adjustments, changing accessories or plac-
ing the vacuum cleaner aside, remove the plug from the
socket outlet.
This safety measure prevents accidental
starting of the vacuum cleaner.

Provide for good ventilation at the working place.
Have the vacuum cleaner repaired only through quali-

fied specialists and only using original spare parts. This
ensures that the safety of your vacuum cleaner is main-
tained.

The vacuum cleaner contains materials
that are hazardous to one’s health.

Have the emptying and maintenance, incl. the disposal of
dust-collection containers, carried out only by specialists.
Appropriate protective equipment is required. Do not op-
erate the vacuum cleaner without the complete filter sys-
tem.
Otherwise there is danger to your own health.
Before restarting, check the proper condition of the

vacuum hose. When doing this, leave the vacuum hose
mounted to the vacuum cleaner to avoid dust from
coming out.
Otherwise, you could possible inhale dust.

Use the mains cable and the vacuum hose carefully.

Other persons could be harmed.

Do not clean the vacuum cleaner with a water jet point-

ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.

Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.

Symbols

The following symbols could have a meaning for the use of your
vacuum cleaner. Please take note of the symbols and their
meaning. The correct interpretation of the symbols will help
you to use the vacuum cleaner in a better and safer manner.

WARNING

Symbols and their meaning

Read all safety warn-
ings and all instruc-

tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Vacuum cleaners of dust category L accord-
ing to IEC/EN 60335-2-69 for dry vacuum-
ing
of materials with an exposition limit val-
ue > 1 mg/m

3

that are hazardous to one’s

health.

The vacuum cleaner
contains materials

that are hazardous to one’s health. Have
the emptying and maintenance, incl. the
disposal of dust-collection containers,
carried out only by specialists. Appropri-
ate protective equipment is required. Do
not operate the vacuum cleaner without
the complete filter system.
Otherwise
there is danger to your own health.

Automatic Start/Stop feature
Extraction of dusts resulting from running
power tools
The vacuum cleaner automatically switches
on and off with a time delay

Switching Off

Vacuuming
Vacuuming of deposited dusts

Specification of the allowable load of the
connected power tool (country-specific)

CAUTION

WARNING

OBJ_BUCH-1746-002.book Page 16 Tuesday, July 23, 2013 1:17 PM