Bosch GOP 250 CE Professional - Manual (Page 14)

14 | English
2 609 932 802 | (14.2.12) Bosch Power Tools
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sawing and cutting wooden mate-
rials, plastic, gypsum, non-ferrous metals and fastening ele-
ments (e.g., unhardened nails, staples). It is also suitable for
working soft wall tiles, as well as for dry sanding and scraping
of small surfaces. It is especially suitable for working close to
edges and for flush cutting. Operate the power tool exclusive-
ly with Bosch accessories.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Thumbwheel for orbit frequency preselection
3 Venting slots
4 Tool holder
5 Handle (insulated gripping surface)
6 Plunge saw blade*
7 Clamping bolt with spring washer (GOP 250 CE)
8 Allen key
9 Adapter for tool holder (GOP 250 CE)
10 Sanding plate*
11 Sanding sheet*
12 SDS lever for releasing the application tool
(GOP 300 SCE)
13 Felt ring of the dust extraction*
14 Retaining clip of the dust extraction*
15 Vacuum connection*
16 Dust extraction*
17 Vacuum hose*
18 Extraction adapter*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Multi-Cutter GOP 250 CE GOP 300 SCE
Article number 3 601 B30 0.. 3 601 B30 5..
Preselection of orbital stroke rate z z
Rated power input W 250 300
Output power W 150 180
No-load speed n
0
min -1 8000–20000 8000–20000
Oscillation angle, left/right ° 1.4 1.4
Weight according to EPTA-Procedure 01/2003 kg 1.5 1.6
Protection class /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
GOP 250 CE GOP 300 SCE
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
dB(A)
dB(A)
dB
81
92
3
79
90
3
OBJ_BUCH-1271-004.book Page 14 Tuesday, February 14, 2012 11:38 AM