Bosch GBG 6 Professional - Manual (Page 13)

English | 13
Bosch Power Tools 1 619 929 L57 | (13.7.12)
Product Description and Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sharpening tools as well as for
grinding and deburring metal.
The machine may only be used for short-time operation
(60 min. max).
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Cover
2 Clamping nut
3 Clamping flange
4 Mounting flange
5 Grinder spindle
6 Blade guard
7 Mounting holes
8 On/Off switch
9 Holder for the spark guard
10 Spark guard
11 Workpiece support
12 Spanner flats of grinder spindle
13 Open-end spanner
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Wear ear protectors. Exposure to noise
can cause hearing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.
Symbols and their meaning
Double bench grinder GBG 6 GBG 8
Article number 3 601 B7A 0.. 3 601 B7A 1..
Rated power input P1 W 350 600
Output power P2
– 50 Hz
– 60 Hz
W
W
240
250
420
–
Operating Mode * S2 (60 min.) S2 (60 min.)
No-load speed
– 50 Hz
– 60 Hz
min -1
min -1
2900
3500
2900
–
Thread of grinder spindle M 12 M 12
Grinding wheels
– Diameter
– Width
– Mounting bore
– Grain size
mm
mm
mm
150
20
20
24/60
200
25
32
24/60
Weight according to EPTA-Procedure 01/2003 kg 10.0 16.5
Protection class /I /I
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
* The operating mode S2 (60 min.) designates short-time operation with a maximum operating duration of 60 minutes. After this period, switch off the
machine and allow it to cool down.
OBJ_BUCH-1501-003.book Page 13 Friday, July 13, 2012 8:00 AM