Bosch AMW 10 RT - Manual (Page 7)

English | 7
Bosch Power Tools F 016 L70 918 | (21.6.12)
f The operator or user is responsible for accidents or haz-
ards occurring to other people or their property.
f Wait until the cutting head has completely stopped before
touching it. The head continues to rotate after the trimmer
is switched off, a cutting head can cause injury.
f Work only in daylight or in good artificial light.
f Operating the trimmer in wet grass decreases the efficien-
cy of performance.
f Switch off when transporting the trimmer to and from the
area to be worked on.
f Switch on the trimmer with hands and feet well away from
the rotating line.
f Do not put hands or feet near the cutting sticks.
f Never fit metal cutting elements to this trimmer.
f Inspect and maintain the trimmer regularly.
f Have the trimmer repaired only by an authorized customer
service agent.
f Switch off and remove the plug from the socket:
– whenever you leave the machine unattended for any
period
– before replacing the cutting stick
– if the cable is entangled
– before cleaning or working on the line trimmer.
– before changing the multi-tool attachment
f The extension pole may not be fittet to the power heavy du-
ty trimmer attachment.
f After use, disconnect the machine from the mains and
check for damage.
f Store the machine in a secure, dry place out of the reach of
children. Do not place other objects on top of the machine.
f Replace worn or damaged parts for safety.
f Only use Bosch approved cutting sticks. Cutting per-
formance will vary with different cutting sticks.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Intended Use
This multi-tool attachment can only be operated by the power
unit AMW 10.
The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with the fol-
lowing standards or standardization documents: EN 60335
according to the provisions of the directives 2006/95/EC,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 96 dB(A).
Equipment category: 33
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
21.05.2012
Noise/Vibration Information
The following information is applicable for the attachment op-
erated by the power unit:
Measured sound values determined according to EN 60335,
EN 786.
Typically the A-weighted noise levels of the product are:
Sound pressure level >85 dB(A); sound power level
94 dB(A). Uncertainty K =2 dB.
Vibration total values (triax vector sum): Vibration emission
value a
h
= 3.5 m/s 2 , Uncertainty K =2 dB.
Symbol Meaning
Wear protective gloves
Wear safety glasses/goggles
Tragen Sie Gehörschutz.
Reaction direction
Accessories/Spare Parts
Heavy Duty Trimmer Attachment AMW RT
Article number 0 600 8A3 C..
Length, cutting sticks cm 15
Cutting diameter cm 36
Weight according to
EPTA-Procedure 01/2003
without power unit
kg 1.35
Serial number see type plate on the
garden product
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1669-001.book Page 7 Thursday, June 21, 2012 2:14 PM